Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2020 Breakout 114 2

This Breakout® 114 model takes a modern edge and shows it off with fat ape handlebars, the Ride Free™ collection and a Screamin' Eagle® air cleaner.

1 - 20 of 33
  • $ 48.62
    $ 48.62

    The Ride Free™ collection celebrates our liberty to enjoy the freedom of the open road, and calls us all to explore, discover and unite with our love of motorcycling. Inspired by Willie G® Davidson's famous phrase, this collection continues that tradition.

    • Wrinkle Black and Chrome finish
    • Includes chrome hardware
  • $ 102.43
    $ 102.43

    The Ride Free™ collection celebrates our liberty to enjoy the freedom of the open road, and calls us all to explore, discover and unite with our love of motorcycling. Inspired by Willie G® Davidson's famous phrase, this collection continues that tradition.

    • Wrinkle Black and Chrome finish
    • Includes chrome hardware
  • $ 102.43
    $ 102.43

    Emphasize the long and lean look of the fuel tank with the Flush-Mount Fuel Cap.

    • Chrome finish
    • Pop-up filler design replaces the Original Equipment twist-on fuel cap
    • With a simple push, the fuel filler cap pops up to provide ample grip, even while wearing gloves
    • Cap features soft-click ratcheting feature to prevent over-tightening
    • Easy to install, the cap assembly screws into position
    • Self-adhesive decorative ring finishes the look
    • Includes screw-in mount, pop-up fuel cap, and matching trim ring
  • $ 178.26
    $ 178.26

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • $ 256.16
    $ 256.16

    The open-face filter design of the Screamin' Eagle® Ventilator Extreme Air Cleaner Kit flows 39% more air than a traditional perimeter high-flow filter.

    • Chrome finish
    • When combined with an additional 1/2" of air filter thickness and the smooth radius die-cast back plate, this open filter can feed a large displacement engine with an unobstructed flow of clean air that can support output of over 150hp
    • Kit includes a die-cast back plate and open-face, water-resistant washable oiled-cotton filter element, and all required installation gaskets and hardware
    • Optional Rain Sock P/N 29400412 is available to protect the exposed element in extreme weather
    • Chrome Cover Kit (P/N 61300993) required to complete installation (sold separately)
    • All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
    • 50-State U.S. EPA compliant
  • $ 576.46
    $ 576.46

    The Bevel Two-Up Seats were created with all the attitude to suit your styling direction while providing all the function without the bulky look of a comfort seat.

    • Low, slim profile of the Bevel Seat complements the lines of your bike
    • Carbon fiber-like inserts, chevron-shaped pleating, HDMC embroidered script and edgy aluminum "no-feel" button detail add a custom look
    • Lightweight, breathable 3-D mesh absorbs the impact of even the worst roads and the material is significantly thinner than comparable seats
    • Taped seams provide water-resistance to keep you and your passengers back-ends dry even when the seat is wet
    • The "bevel" at the back of the seat adds to the riders lower back comfort
    • Seat width 12.25"
    • Passenger pillion width 7"
  • $ 217.72
    $ 217.72

    The Ventilator Extreme Air Cleaner Cover trims the face of the Screamin' Eagle® Extreme Ventilator filter in style and features aggressive mounting lugs, polished stainless steel custom ARP fasteners and an inset Screamin' Eagle® medallion.

    • Chrome finish
    • Made from cast aluminum
    • Wraps the leading edge of the filter element, covering the rubber gasket without restricting air flow
    • Required to complete installation of the Ventilator Extreme Air Cleaner Kit P/N 29400396 & 29400397
    • Includes necessary ARP hardware
  • $ 64.00
    $ 64.00

    The ideal choice for maximum versatility, this complete kit contains the docking hardware necessary to install all HoldFast™ detachable accessory options. Even if you only install a passenger backrest today, this kit allows you to add additional accessories as your touring demands change.

    • Gloss black finish
    • Allows the addition of accessories as your touring demands change
    • Includes docking points to allow installation of H-D® Detachables Sissy Bar, Solo Luggage Rack, Two-Up Luggage Rack, Solo Tour-Pak® Rack or Two-Up Tour-Pak® Rack.
  • $ 320.23
    $ 320.23

    These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly pushrod adds rigidity and durability, and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes.

    • To simplify adjustment, the pushrod features six flats, with one flat marked with a large dot for tracking the adjustment
    • Threaded rod features 4 flats to reduce wrench swing
    • Kit includes 4 pushrods, required gloss black pushrod tube covers and o-rings
  • $ 102.43
    $ 102.43

    Complete your Milwaukee-Eight engine's conversion to a total blacked-out look.

    • Gloss Black finish
    • Replaces the stock bright-finished components for a sinister appearance
    • Manufactured from Original Equipment components for perfect fit and function
    • Kit comes complete with a front and rear cylinder lifter covers and two base gaskets
  • $ 333.04
    $ 333.04

    This true 12” mid-rise Ape handlebar is the perfect mix of comfort and style. This bar features a traditional shape that tapers from a narrow base to a wide-open stance, and provides a flatter hand position with slightly less of the turned-in shape that can put stress on your wrists.

    • Chrome finish
    • 1.25” diameter fat bar is factory drilled to allow internal wiring
    • Can be installed in the Original Equipment risers on models factory-equipped with 1.25” handlebars
    • See Guides tab for additional components required for installation
  • $ 512.40
    $ 512.40

    Anything but traditional, this complete collection of engine covers refuses to conform to everyday norms. The sweeping aero curves define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Designed side-by-side with Original Equipment components
    • Exquisitely engineered cast and billet parts are machined to fit perfectly
    • Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately).
    • Sold in pairs
  • $ 128.05
    $ 128.05

    Forged from aluminum, this Billet Style Shift Lever is machined and polished for a beautiful, custom look.

    • Edge Cut finish
    • For Forward Controls
    • Includes chrome hardware
    • Shifter pegs sold separately
  • $ 179.29
    $ 179.29

    Continue the chrome theme with these Hand Control Levers. Cast from aluminum, these levers feature a custom finish designed to match the accessory chrome hand controls or complement Original Equipment-style black components.

    • Chrome Finish
    • Clutch anti-rattle clip and new pivot bushing included
  • $ 230.54
    $ 230.54

    Styled to complement our billet style mirror stems and hand and foot controls, this slotted Rear Brake Lever is forged from aluminum, then machined and polished for a beautiful, custom look.

    • Edge Cut finish
    • For Forward Controls
    • Brake pedal pads sold separately
  • $ 25.56
    $ 25.56

    Required for installation of accessory Front Axle Covers on hollow-axle ’18-later Softail models.

    • For use on '18-later Softail models
    • Includes threaded axle spacer, left and right adapters and all hardware
  • $ 38.37
    $ 38.37

    Cover your rear axle nut in the most traditional way. These rear axle covers fit into the recessed eye of the swingarm, and the low profile design allows installation without removal of the mufflers.

    • Gloss Black Finish
    • Includes necessary mounting hardware
    • Easy to install
    • Sold in pairs
  • $ 256.16
    $ 256.16

    This kit replaces the factory painted forward control mounts with brilliant chrome.

    • Chrome finish
    • Finished to complement chrome or polished foot pegs and levers
    • Manufactured from Original Equipment components for proper fit
    • Includes left and right supports and chrome mounting hardware
  • $ 166.48
    $ 166.48

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome Finish
    • Features rich textured black rubber traction surfaces set in a field of mirror chrome
    • Includes a stylized H-D logo for a modern sleek look
  • $ 166.48
    $ 166.48

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome Finish
    • Features rich textured black rubber traction surfaces set in a field of mirror chrome
    • Includes a stylized H-D logo for a modern sleek look
1 - 20 of 33

Harley-Davidson® Parts

Narrow Your Search

Colour