Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2017 Fat Bob

1 - 20 of 33
  • $ 48.86
    $ 48.86

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. The Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 158.90
    $ 158.90

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary “H-D®” logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Custom aluminum footpegs feature a pattern of deep lateral grooves and a stylized “H-D®” logo for a modern sleek look
    • Topped with high-traction rubber
  • $ 61.08
    $ 61.08

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. The Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accenting grooves
    • Easy to install
  • $ 158.90
    $ 158.90

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. Defined by sweeping curves and accented with deep longitudinal lines and a contemporary H-D® logo, the Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Comfortable 1.5" diameter grips are easy to install
    • Incorporates a “glueless” design that allows you to remove the grips for service without damage
  • $ 427.94
    $ 427.94

    When it's time to go it alone, go solo in style. This premium quality cowhide leather saddle features a smooth, sleek design that hugs the frame rails for a true custom look.

    • Designed to place the rider "in" the bike for a low-slung riding position
    • Top-grain leather seating surface and contoured foam padding provide a firm but luxurious feel
    • Does not fit with passenger pillions
    • Seat width 12.5"
  • $ 519.31
    $ 519.31

    Designed to complement the wheel's styling, these custom sprockets are manufactured from 6061-T6 forged billet aircraft aluminum, and precision machined to exacting Original Equipment standards.

    • Gloss black cut back design
    • Finished with a proprietary process that combines the decorative chrome with a wear-resistant surface applied to the teeth
    • Requires separate purchase of model-specific sprocket mounting hardware
  • $ 226.16
    $ 226.16

    The Stage I Air Cleaner Kit provides increased airflow to boost the power of your fuel-injected model.

    • Chrome back plate
    • Features a one-piece cast back plate with integral breather and mounting brackets for simplified installation
    • Synthetic washable air cleaner element does not require oiling
    • Round air cleaner element can be dressed with most Original Equipment or accessory air cleaner covers or choose to flaunt your performance gains with the open element look
    • Finish it off with a Rain Sock Kit P/N 28728-10 and custom Air Cleaner Trim from one of the H-D® decorative collections
    • Street legal when used with stock mufflers
    • Includes air cleaner, back plate, breather and all required hardware
    • All EFI-equipped models require ECM calibration (priced separately), Recalibration is required for proper installation, See Dealer for details, Labor cost is not included
  • $ 85.54
    $ 85.54

    The Edge Cut master cylinder cover features a crisp anodized finish that is machined to expose the highlights of raw aluminum.

    • Edge Cut finish
    • Contrasting cut back look makes a powerful visual statement
    • Works great with both traditional and contemporary customizing styles
    • Direct replacement for the Original Equipment master cylinder cover
    • Includes cover, gasket, and decal
    • Easy to install
  • $ 281.20
    $ 281.20

    Keep an eye on everything, while everyone keeps an eye on you. These compact billet mirrors feature glass-smooth domed shells and wet-look black surfaces to reflect a new contemporary style.

    • Precision machined edge exposes three bands of satin aluminum for a brilliant contrast
    • Sleek round stems keep the mirrors close to the controls for a tight tucked-in profile
  • $ 733.64
    $ 733.64

    Experience a comfortable and confidence-inspiring ride – no matter the pavement conditions – with Harley-Davidson® Premium Ride Emulsion Shocks.

    • Fast acting mono-tube nitrogen gas-charged shocks offer enhanced compression and rebound damping control when compared to typical twin-tube shock absorbers
    • Nitrogen gas charged shocks resist oil aeration and work with the internal valve stack to provide superior damping control in the twisties
    • Large 36mm pistons and low viscosity high-performance oil allow these shocks to react quickly to impacts and keep the tires tracking the road surface
    • Locking threaded adjustment lets you fine tune the spring preload to your current riding conditions
    • Urethane bumpers provide a softer feel if the shock bottoms under load – whether a solo run on the back roads or a fully-loaded two-up freeway tour
    • You get a controlled ride and minimized bottoming harshness transmitted through the frame
    • Beautifully-finished shocks feature black-anodized billet top caps and black progressively-wound springs
    • Kit includes left and right shock and preload adjustment spanner wrench
  • $ 232.29
    $ 232.29

    Complete the custom look with the Split 7 Spoke Floating Brake Rotor, styled to complement Original Equipment or custom wheels. This floating rotor features a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Black
    • Front, left or front, right
    • Sold individually
    • Chrome rotors include chrome installation hardware
  • $ 232.29
    $ 232.29

    Complete the custom look with the Split 7 Spoke Floating Brake Rotor, styled to complement Original Equipment or custom wheels. This floating rotor features a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Rear
    • Black
    • Sold individually
    • Chrome rotors include chrome installation hardware
  • $ 54.96
    $ 54.96

    Necessary docking hardware for installation of H-D® Detachables™ rack or sideplate.

    • Required for installation of H-D® Detachables™ sideplates, sissy bars and racks on specified models
  • $ 20.73
    $ 20.73

    Easy-to-install inserts add a finishing touch to the front and rear brake calipers. Select a style that follows your custom direction.

    • Classic Chrome design
    • Easy to install
    • Self-adhesive backing
  • $ 53.74
    $ 53.74

    Finish the sinister black look of your motorcycle with the Black Fin Collection from Harley-Davidson®.

    • Raised horizontal lines on these die-cast covers echo the traditional cylinder fin look
    • Wrinkle black finish is a perfect match for the blacked-out primary, cam cover and accessory Finned Headbolt Bridge Kit
  • $ 61.08
    $ 61.08

    Add a little attitude to your ride. Styled to complement Harley-Davidson® Skull accessory items, the menacing raised skull with black-filled eyes leaps from a field of chrome.

    • Surrounding Harley-Davidson® Motorcycles script is the perfect finishing touch
    • Includes chrome-plated stainless steel mounting hardware
  • $ 31.74
    $ 31.74

    Finish the sinister black look of your motorcycle with the Black Fin Collection from Harley-Davidson®.

    • Raised horizontal lines on these die-cast covers echo the traditional cylinder fin look
    • Wrinkle black finish is a perfect match for the blacked-out primary, cam cover and accessory Finned Headbolt Bridge Kit
  • $ 36.63
    $ 36.63

    Cover your rear axle nut in the most traditional way.

    • Die-cast, chrome-plated
    • Complement the matching Front Axle Nut covers
    • Easy-to-install, these cover kits include necessary mounting hardware
    • Sold in pairs
  • $ 79.44
    $ 79.44

    This exclusive aluminum Finned Headbolt Bridge covers both headbolts and the spark plug, filling out your cylinder fins all the way to the rocker box.

    • Features an engraved Bar & Shield emblem
    • Easy to install with unique headbolt mounts
    • Sold in pairs
    • Includes all necessary mounting hardware
  • $ 54.96
    $ 54.96

    Cover the front axle in a classic style. Chrome-plated axle nut covers look great with Original Equipment satin-finish fork sliders, or add a finishing touch to a complete chrome front end.

    • Easy to install
    • Includes mounting hardware
    • Sold in pairs
1 - 20 of 33

Harley-Davidson® Parts

Narrow Your Search

Colour
Lens Colour