Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2017 Road King

1 - 20 of 44
  • $ 730.21
    $ 730.21

    Complete with integrated LED brake lights, turn indicators and tail lights, this custom rear fascia and fender kit keeps the back of your bike clean, classy and simple.

    • Originally featured on CVO™ Touring models
    • Kit includes everything you need to smoothly blend the shape of the rear fender into the saddlebags and hide the saddlebag mounting structure
    • Domestic (U.S. only)
  • $ 371.47
    $ 371.47

    Create a sleek, slammed look on your custom bagger with the Chopped Engine Guard. This guard offers a slim, low-profile design that retains function while delivering a unique styling twist.

    • Gloss black
    • Upper mounts connect midway up the downtube, 11" inches lower than the stock guard
    • Minimalistic look reduces the visual mass of the bike, while the mounting point lowers the bike’s visual center of gravity
    • 1.25” Engine Guard features a slightly forward sweep that provides plenty of room around the brake and shift levers
    • Easy to install
  • $ 153.68
    $ 153.68

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • $ 512.40
    $ 512.40

    Designed in concert with the Milwaukee-Eight powertrain, the iconic Heavy Breather Air Cleaner features a forward facing oiled cotton filter element that flows large volumes of clean air into the engine.

    • Gloss black
    • Short, low-profile cast tube rams the charge directly into the throttle body with little turbulence for increased power and torque
    • Intake tube mounts to a custom back plate that features integral breathers and covers the throttle body and electronics for a finished look
    • Slanted compact filter adds an aggressive performance look
    • Shaped to allow installation on Touring bikes equipped with fairing lowers
    • Kit includes filter, intake tube, custom back plate, water-repellent rain sock and all mounting hardware
    • All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
    • ECE and 50-State U.S. EPA compliant
  • $ 102.43
    $ 102.43

    It’s the details that make the complete custom bike.

    • Gloss black
    • Dresses the end of the starter motor for a clean look.
  • $ 51.19
    $ 51.19

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 1,120.96
    $ 1,120.96

    Bring the gleam and add some edge. Thid cast aluminum Turbine-style wheel features 21 spokes which extend all the way to the edge of the rim, creating the illusion of a larger wheel diameter.

    • 18" rear wheel
    • Contrast chrome finish
    • Meticulously polished and chrome plated for maximum reflective effect
    • Certified by Harley-Davidson® to perform to our tough vehicle standards for quality and durability
    • Requires separate purchase of model-specific wheel installation kit, sprocket hardware and brake rotor-specific hardware
    • Installation may require purchase of wheel size model-specific tire
  • $ 320.23
    $ 320.23

    Complete the custom look with floating brake rotors, styled to complement Original Equipment or custom wheels. Floating rotors feature a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Front
    • Polished
    • Sold individually
    • Include chrome installation hardware
  • $ 1,120.96
    $ 1,120.96

    Bring the gleam and add some edge. This cast aluminum Turbine-style wheel features 21 spokes which extend all the way to the edge of the rim, creating the illusion of a larger wheel diameter.

    • 19" front wheel
    • Contrast chrome finish
    • Meticulously polished and chrome plated for maximum reflective effect
    • Certified by Harley-Davidson® to perform to our tough vehicle standards for quality and durability
    • Requires separate purchase of model-specific wheel installation kit, sprocket hardware and brake rotor-specific hardware
    • Requires separate purchase of (2) Turbine Floating Brake Rotors P/N 41500120
    • Installation may require purchase of wheel size model-specific tire
  • $ 550.84
    $ 550.84

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Offers plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Complements almost any customizing style
    • Includes left and right boards
  • $ 70.40
    $ 70.40

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
    • Complements almost any customizing style
    • Easy to install
  • $ 179.29
    $ 179.29

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Comfortable 1.5" diameter grips are easy to install
    • Incorporates a “glueless” design that allows you to remove the grips for service without damage
    • Complements almost any customizing style
  • $ 576.46
    $ 576.46

    Give your bike a big hug. This all-steel fender is shaped to show off the full profile of your 19” front wheel.

    • Primed and ready for your custom paint design
    • Apron-less fender wraps almost 180 degrees around the front tire for a clean, custom appearance
    • Low profile cutaway design exposes the wheel from hub to rim for maximum visual impact
    • Designed for mistake-proof installation
    • Pre-drilled to fit Original Equipment fender mounting bosses, and does not require additional fender spacers or install kits
  • $ 576.46
    $ 576.46

    Add a long, lean look to the profile of your Touring bike. These Stretched Side Covers are sculpted to smooth the visual transition from the side of the bike to the front of the saddlebag, and trade the traditional stepped look for a rearward flowing design.

    • Primed and ready for your custom paint design
    • Shaped to flare out and down the saddlebag face
    • Complements the body lines and eliminate the saddlebag guard clearance notch at the lower corner for a seamless flow
    • Unlike some aftermarket designs, these side covers fit without significantly compromising the available passenger foot space
    • One-piece covers are a snap-in replacement for the Original Equipment covers
    • Requires no bonding or modification for installation
  • $ 192.11
    $ 192.11

    New and improved “capacitive” level sensing technology provides the highest degree of accuracy and durability. This dipstick allows you to check your oil level and oil temperature with the push of a button. No more grabbing a rag to pull your hot dipstick. No more oil drips on your pipes and on the garage floor.

    • Gloss black finish
    • Add function and style by replacing your stock dipstick with this hard working version
    • Simply push the button and this dipstick lights up with a brilliant backlight
    • Oil level is indicated by a four-segment readout – it even reminds you to check your oil when it is hot
    • Waterproof LCD (liquid crystal display) readout operates on long-lasting, replaceable lithium coin-type battery (P/N 91800066)
    • Display features a low battery indicator and press-and-hold feature to toggle between Fahrenheit and Celsius
  • $ 192.11
    $ 192.11

    Shaped to provide a complete finishing touch to the rear of your bike.

    • Satin Black finish
    • These slash cut end caps feature a reverse cone rolled edge for a massive solid billet look
    • Reverse cone opening hugs the internal slotted flash suppressor-inspired barrel for a weapons-grade style
    • Sold in pairs
  • $ 320.23
    $ 320.23

    These formed steel exhaust shields feature a unique black coating that complements the finish of the Screamin’ Eagle black slip-on mufflers.

    • Rich black coating maintains its uniform black finish and has survived stringent Harley-Davidson® testing for durability and corrosion resistance
    • Manufactured to Original Equipment standards for exacting fit
    • Easy-to-install
    • Includes front and rear head pipe shields
  • $ 2,177.92
    $ 2,177.92

    This kit was developed for the rider looking for a solid “seat of the pants” increase you can feel – every time you roll on the throttle. The increase in displacement and the bump in compression deliver a significant increase in torque and power over stock while restoring the sensation of riding solo when taking that long trip with a passenger and luggage.

    • Delivers up to 39% more power when compared to the Original Equipment engine configuration
    • Delivers increased throttle response throughout the entire RPM range
    • Produces flexible roll-on passing power without a required downshift
    • Delivers excellent stop-light to freeway speed on-ramp acceleration
    • Retains Original Equipment Factory Warranty
    • 50-State U.S. EPA compliant
    • Includes 4.075" Bolt-On Cylinders, Forged 11:1 High Compression Pistons, High performance Piston Rings and Tappets, SE8-498 Cam, Performance Valve Springs, Multi-layer coated Head Gaskets, Cylinder Base & Cam Cover Gaskets, High-Capacity Clutch Spring
  • $ 896.74
    $ 896.74

    Upgrade your black and chrome Milwaukee-Eight motor to the sinister look of gloss black. These richly finished engine covers start your bike on its journey to the dark side.

    • Manufactured from Original Equipment components
    • Critical gasket surfaces are masked to provide a good sealing surface with the engine
    • Six-piece kit includes the primary cover, cam cover, upper rocker box covers, transmission side cover and transmission top cover
    • Rocker box lower housings are available separately
  • $ 448.35
    $ 448.35

    When it's time to go it alone, go solo in style. This premium quality cowhide leather saddle features a smooth, sleek design that hugs the frame rails for a true custom look.

    • Designed to place the rider "in" the bike for a low-slung riding position
    • Top-grain leather seating surface and contoured foam padding provide a firm but luxurious feel
    • Does not fit with passenger pillions
    • Seat width 13"
1 - 20 of 44

Harley-Davidson® Parts

Narrow Your Search

Colour
Lens Colour