Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2017 Softail Slim 3

1 - 20 of 28
  • $ 38.37
    $ 38.37

    Fat 10mm plug wires add dimension and style to your ride. Screamin' Eagle® boot design and suppression core wires ensure solid connection and maximum voltage transfer between coil and plugs.

    • Red 10mm wire
    • Screamin' Eagle® graphic printed along wire
  • $ 51.19
    $ 51.19

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 550.84
    $ 550.84

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Offers plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Complements almost any customizing style
    • Includes left and right boards
  • $ 89.62
    $ 89.62

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
    • Complements almost any customizing style
    • Easy to install
  • $ 179.29
    $ 179.29

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut
    • Comfortable 1.5" diameter grips are easy to install
    • Incorporates a “glueless” design that allows you to remove the grips for service without damage
    • Complements almost any customizing style
  • $ 736.60
    $ 736.60

    Daymaker™ LED Lamps are brighter and provide a superior light pattern than standard incandescent bulbs. This LED lamp produces a whiter noon-day sun colour impression that is easy on the eyes and appears more natural to the rider. The night-time beam pattern is focused on the road ahead, and is engineered to reduce the sharp contrast at the horizon line.

    • Solid-state LEDs are designed for long life and low energy draw
    • Features a single top-mount low-beam projector lens, a large bottom-mount high-beam projector lens and 2"D" shaped fill-light lenses
    • Installation of the shock- and vibration-resistant lamp assembly is quick and easy with a plug-in connection to the factory headlamp wiring
    • Includes a subtle rear-lit Bar & Shield logo that glows when the ignition is in the accessory switch position
    • DOT and ECE compliant for all markets
    • 7" Gloss Black Headlamp
  • $ 115.23
    $ 115.23

    Grab the attention of the traffic around you. LED Turn Signal Inserts feature a single bright, fast-acting amber LED lamp sealed in a waterproof housing. The multi-faceted reflector amplifies the light, and the focused lens spreads the light across the lamp’s surface.

    • Amber LED Insert
    • Drop-in lamp assembly replaces the bulb and reflector in the stock bullet turn signal housing for a simple on-bike installation
    • Included plug-in harness and crimp connectors attach directly to the existing turn signal wiring
    • Installation does not require a control box or load equalizer for correct operation
    • Kit includes 2 LED modules, 2 wiring harnesses, and crimping connectors
    • Customize the look with your choice of outer lens cover colour
    • Lenses sold separately
    • Amber Inserts are DOT and ECE compliant
  • $ 16.60
    $ 16.60

    Add a unique touch to your bike with these lenses.

    • Smoked Lenses
    • Replaces the Original Equipment lenses when you install LED Bullet Turn Signal Inserts P/N 67800639 or 67800640
    • Available in amber, clear, smoked and red to match your style or functional needs
    • Kit contains 2 lenses
    • ECE/DOT compliant with Amber insert
    • DOT compliant with Red insert
  • $ 2,685.26
    $ 2,685.26

    Turn your Original Equipment 110 cubic inch model into a fast, reliable 117 cubic inch Twin Cam hauler without having to remove the motor from the chassis. This Street Performance Kit combines system-matched Screamin’ Eagle big bore cylinders, forged pistons and performance cams and valve train components with the Original Equipment cylinder heads for a cost-effective boost in torque and performance.

    • Black finish
    • Exclusive bolt-on 4.125" cylinders are engineered with high strength slim-wall spigots that slip into the factory 110CI crank case without any additional machining
    • 4.125" flat top pistons team with the stock cylinder heads to produce a performance-enhancing 9.9:1 compression ratio
    • High-lift SE-259E cam produces a boost in torque throughout the RPM range
    • All EFI-equipped models require dealer-installed ECM calibration download or use of the tunable Screamin' Eagle® Street Tuner Kit* (priced separately)
    • Recalibration is required for proper installation, See Dealer for details, Labor cost not included
    • Includes 4.125" Bolt-On Cylinders, Forged 9.9:1 Compression Pistons & Rings, 58mm Throttle Body, High Flow Fuel Injectors, SE-259E Cams, Perfect-Fit Pushrods, High-Capacity Roller Tappets, Inner Cam Bearing, Top End & Cam Cover Gasket, EO Emissions Label
  • $ 38.37
    $ 38.37

    Complete your Twin Cam engine’s conversion to the total blacked-out look.

    • Gloss black finish
    • Manufactured from Original Equipment components for perfect fit and function
    • Replaces the chrome-finished factory covers
    • Fits with stock or Screamin’ Eagle® Quick-Install Pushrods
    • Consult your dealer or service manual for installation
  • $ 102.43
    $ 102.43

    Complete your Twin Cam engine's conversion to a total blacked-out look.

    • Textured black tappet blocks replace the stock bright-finished components for a sinister appearance
    • Manufactured from Original Equipment components for perfect fit and function
    • Perfect complement to Gloss Black Pushrod Cover Kit P/N 17900033 and Gloss Black Pushrod Collars P/N 17900076 (sold separately)
  • $ 63.99
    $ 63.99

    It is all in the details. Complete your total front end with these wheel spacers in mirror chrome or gloss black finish.

    • Gloss black finish
    • Manufactured to the Original Equipment tolerances
    • Deliver the exact fitment and custom shine
  • $ 294.61
    $ 294.61

    Keep an eye on everything, while everyone keeps an eye on you. These compact billet mirrors feature glass-smooth domed shells and wet-look black surfaces to reflect a new contemporary style.

    • Precision machined edge exposes three bands of satin aluminum for a brilliant contrast
    • Sleek round stems keep the mirrors close to the controls for a tight tucked-in profile
  • $ 473.97
    $ 473.97

    The bold styling of this intake system looks just as impressive as the long patch of burnout rubber you just laid down.

    • Race-inspired air cleaner is engineered to flow high volumes of air and the washable pleated element provides the ideal combination of efficiency and engine protection
    • Forged billet aluminum cover tops off a cast back plate with integral breather for a smooth transition to the throttle body
    • Compliant when used with legal Stage IV Performance Kits and models equipped with legal SE120ST engines equipped with street-legal Screamin' Eagle® 58mm High-Flow throttle body
    • 50-state compliant when used on CVO™ models with 110CI engines
    • Easy-to-install kit includes all mounting hardware and rain sock
    • All EFI-equipped models require ECM calibration (priced separately)
    • Recalibration is required for proper installation. See Dealer for details. Labor cost not included
    • Chisel style and Cut Back Gloss Black finish
  • $ 243.37
    $ 243.37

    Complete the custom look with the Split 7 Spoke Floating Brake Rotor, styled to complement Original Equipment or custom wheels. This floating rotor features a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Black
    • Front, left or front, right
    • Sold individually
    • Chrome rotors include chrome installation hardware
  • $ 243.37
    $ 243.37

    Complete the custom look with the Split 7 Spoke Floating Brake Rotor, styled to complement Original Equipment or custom wheels. This floating rotor features a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Rear
    • Black
    • Sold individually
    • Chrome rotors include chrome installation hardware
  • $ 89.62
    $ 89.62

    Complete the Dark Custom™ look. These covers replace existing chrome covers to give your bike a blacked-out appearance down to the smallest detail.

    • Cover Kit can be installed on engines already equipped with Adjustable Pushrods, or can be installed by removing rocker box covers, rocker arms, and non-adjustable pushrods
    • Pushrod covers are finished in a gloss black and include the four bottom cover tubes and the four upper clips
    • Installation retains the Original Equipment chrome short center tube to create a high-contract accent
    • Consult your dealer or service manual for installation
  • $ 140.86
    $ 140.86

    Designed by Harley-Davidson® to lower the front fork approximately 1.0" while preserving ride quality.

    • Lowers the front fork approximately 1.0"
    • Springs are wound to allow a compliant, yet controlled ride
    • A perfect addition during the installation of chrome or gloss black lower fork sliders
    • Must only be installed on vehicles equipped with low-profile rear suspension
  • $ 56.31
    $ 56.31

    Finish the sinister black look of your motorcycle with the Black Fin Collection from Harley-Davidson®.

    • Raised horizontal lines on these die-cast covers echo the traditional cylinder fin look
    • Wrinkle black finish is a perfect match for the blacked-out primary, cam cover and accessory Finned Headbolt Bridge Kit
  • $ 33.26
    $ 33.26

    Finish the sinister black look of your motorcycle with the Black Fin Collection from Harley-Davidson®.

    • Raised horizontal lines on these die-cast covers echo the traditional cylinder fin look
    • Wrinkle black finish is a perfect match for the blacked-out primary, cam cover and accessory Finned Headbolt Bridge Kit
1 - 20 of 28

Harley-Davidson® Parts

Narrow Your Search

Colour
Lens Colour