Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2017 Street Glide Special 2

1 - 20 of 48
  • $ 179.29
    $ 179.29

    Grab some black with these levers – a natural fit for black accessory handlebars or to further the blacked-out look of your motorcycle.

    • Black
    • Includes clutch anti-rattle clip and new pivot bushings
  • $ 371.47
    $ 371.47

    Create a sleek, slammed look on your custom bagger with the Chopped Engine Guard. This guard offers a slim, low-profile design that retains function while delivering a unique styling twist.

    • Gloss black
    • Upper mounts connect midway up the downtube, 11" inches lower than the stock guard
    • Minimalistic look reduces the visual mass of the bike, while the mounting point lowers the bike’s visual center of gravity
    • 1.25” Engine Guard features a slightly forward sweep that provides plenty of room around the brake and shift levers
    • Easy to install
  • $ 44.77
    $ 44.77

    Harness plugs into accessory connector to provide 12-volt power leads. Required to install Heated Grips, XM® Radio, Cruiser Amp & Speaker Systems, zumo GPS, Digital Oil Pressure Gauge, Garage Door Opener Kits, Heated Seats, decorative lighting or other electrical accessories.

    • Plugs into accessory connector
    • Ability to provide 12-volt power leads
  • $ 576.46
    $ 576.46

    When combined with the wiring harness and amplifier mount contained in the appropriate Stage II Speaker Installation Kit, this amplifier can power a single pair of Tour-Pak®, Saddlebag Lid, Fairing Lower or Trike Body Stage II Speakers.

    • Amplifier is required when adding a second, third or fourth set of Stage II Speakers to your Boom!™ Audio-equipped Touring bike
    • Dealer Digital Technician software update is required
    • Dealer installation is recommended
  • $ 153.68
    $ 153.68

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • $ 512.40
    $ 512.40

    Designed in concert with the Milwaukee-Eight powertrain, the iconic Heavy Breather Air Cleaner features a forward facing oiled cotton filter element that flows large volumes of clean air into the engine.

    • Gloss black
    • Short, low-profile cast tube rams the charge directly into the throttle body with little turbulence for increased power and torque
    • Intake tube mounts to a custom back plate that features integral breathers and covers the throttle body and electronics for a finished look
    • Slanted compact filter adds an aggressive performance look
    • Shaped to allow installation on Touring bikes equipped with fairing lowers
    • Kit includes filter, intake tube, custom back plate, water-repellent rain sock and all mounting hardware
    • All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
    • ECE and 50-State U.S. EPA compliant
  • $ 102.43
    $ 102.43

    It’s the details that make the complete custom bike.

    • Gloss black
    • Dresses the end of the starter motor for a clean look.
  • $ 51.19
    $ 51.19

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 1,120.96
    $ 1,120.96

    Bring the gleam and add some edge. Thid cast aluminum Turbine-style wheel features 21 spokes which extend all the way to the edge of the rim, creating the illusion of a larger wheel diameter.

    • 18" rear wheel
    • Contrast chrome finish
    • Meticulously polished and chrome plated for maximum reflective effect
    • Certified by Harley-Davidson® to perform to our tough vehicle standards for quality and durability
    • Requires separate purchase of model-specific wheel installation kit, sprocket hardware and brake rotor-specific hardware
    • Installation may require purchase of wheel size model-specific tire
  • $ 320.23
    $ 320.23

    Complete the custom look with floating brake rotors, styled to complement Original Equipment or custom wheels. Floating rotors feature a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Front
    • Polished
    • Sold individually
    • Include chrome installation hardware
  • $ 1,120.96
    $ 1,120.96

    Bring the gleam and add some edge. This cast aluminum Turbine-style wheel features 21 spokes which extend all the way to the edge of the rim, creating the illusion of a larger wheel diameter.

    • 19" front wheel
    • Contrast chrome finish
    • Meticulously polished and chrome plated for maximum reflective effect
    • Certified by Harley-Davidson® to perform to our tough vehicle standards for quality and durability
    • Requires separate purchase of model-specific wheel installation kit, sprocket hardware and brake rotor-specific hardware
    • Requires separate purchase of (2) Turbine Floating Brake Rotors P/N 41500120
    • Installation may require purchase of wheel size model-specific tire
  • $ 512.40
    $ 512.40

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Offers plenty of options for foot repositioning while riding
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface, surrounded by deep grooves and a contemporary H-D® logo
    • Includes left and right boards
  • $ 166.48
    $ 166.48

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Custom aluminum footpegs feature a pattern of deep lateral grooves and a stylized H-D® logo for a modern sleek look
    • Topped with high-traction rubber
  • $ 83.23
    $ 83.23

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
    • Easy to install
  • $ 179.29
    $ 179.29

    These billet-style mirror feature a low-profile swept back design with a shape that tucks in close to the hand controls.

    • Satin black with solid stem
    • Teardrop shape provides excellent rearward visibility
    • Slim lines add a true custom touch
    • Sold in pairs
  • $ 166.48
    $ 166.48

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Comfortable 1.5" diameter grips are easy to install
    • Incorporates a “glueless” design that allows you to remove the grips for service without damage
  • $ 192.11
    $ 192.11

    Shaped to provide a complete finishing touch to the rear of your bike.

    • Satin Black finish
    • These slash cut end caps feature a reverse cone rolled edge for a massive solid billet look
    • Reverse cone opening hugs the internal slotted flash suppressor-inspired barrel for a weapons-grade style
    • Sold in pairs
  • $ 320.23
    $ 320.23

    These formed steel exhaust shields feature a unique black coating that complements the finish of the Screamin’ Eagle black slip-on mufflers.

    • Rich black coating maintains its uniform black finish and has survived stringent Harley-Davidson® testing for durability and corrosion resistance
    • Manufactured to Original Equipment standards for exacting fit
    • Easy-to-install
    • Includes front and rear head pipe shields
  • $ 384.29
    $ 384.29

    Kit includes the hardware and wiring harnesses required to install Stage II Saddlebag Speakers and a Boom!™ Amplifier.

    • Includes main wiring harness, quick-disconnect saddlebag wiring harnesses, mount and cover for saddlebag-mounted amplifier, and all required hardware
    • Amplifier, Boom!™ Stage II Speakers and Colour-Matched Speaker Lids are sold separately
  • $ 896.74
    $ 896.74

    Upgrade your black and chrome Milwaukee-Eight motor to the sinister look of gloss black. These richly finished engine covers start your bike on its journey to the dark side.

    • Manufactured from Original Equipment components
    • Critical gasket surfaces are masked to provide a good sealing surface with the engine
    • Six-piece kit includes the primary cover, cam cover, upper rocker box covers, transmission side cover and transmission top cover
    • Rocker box lower housings are available separately
1 - 20 of 48

Harley-Davidson® Parts

Narrow Your Search

Colour