We uses cookies and other technologies so that we can improve your experience on our site. Read our Cookie Policy. Got It!
Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2018 Fat Bob 2

Featuring the Screamin' Eagle® 117CI stage IV kit and Holdfast® short sissy bar upright.

1 - 20 of 27
  • £ 2,815.39
    £ 2,815.39

    This Stage IV Kit was developed to deliver maximum horsepower from the Milwaukee-Eight® engine - all the way to the redline. The system-matched combination of larger displacement cylinders, free flowing CNC-Ported cylinder heads and a cam with the highest available valve lift are the starting point to building the perfect engine for the performance junkie. Designed for a high level of flexibility, this package is ideal for riders who like to comfortably cruise at lower rpm but still have plenty of arm-pulling acceleration when you whack the throttle. Kit includes CNC Ported Cylinder Heads with Performance Valve Springs, 64mm Throttle Body, High Flow Injectors (5.5g/s), 4.075" Bolt-On Cylinders, Forged 11:1 High Compression Aluminum Coated Pistons and Rings, SE8-515 Cam, Cam Bearing Upgrade, High Performance Tappets, Multi-layer Coated Head Gaskets, High Capacity Clutch Springs (1200N) and most necessary gaskets and seals. For ’17 and ’18 Touring models, installation of oil pump cover P/N 62400206 is recommended (sold separately). All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation. See Dealer for details. Pending approval for use in California on '19 models. Refer to the product information at www.H-D.com/shop for status.

    • Stage IV Kit 114 to 117CI - Air/Oil-Cooled
    • Black Highlighted
    • Increases power by up to 40% when compared to the Original Equipment engine configurations
    • Delivers increased response throughout the entire RPM range
    • Maintains flat torque curve from cruising RPM to redline
    • Can be installed without removing the engine from the chassis
    • Retains Original Equipment Factory Warranty and 50-State U.S. EPA compliant
    • Pending Regulatory approval for '19-later models
  • £ 47.66
    £ 47.66

    Finish the sinister black look of your motorcycle with the Black Fin Collection from Harley-Davidson®.

    • Raised horizontal lines on these die-cast covers echo the traditional cylinder fin look
    • Wrinkle black finish is a perfect match for the blacked-out primary, cam cover and accessory Finned Headbolt Bridge Kit
  • £ 46.58
    £ 46.58

    Cover your rear axle nut in the most traditional way.

    • Gloss Black
    • Complement the matching Front Axle Nut covers
    • Easy-to-install, these cover kits include necessary mounting hardware
    • Sold in pairs
  • £ 140.93
    £ 140.93

    Kick your custom into gear with this collection of high quality custom shift linkages.

    • Black anodized slotted design with Bar & Shield graphic
    • Feature aircraft-quality rod ends for easy adjustment and smooth operation
    • Easy to install
    • Includes a transmission lever cover and decorative acorn nuts and bolts for a complete custom look
  • £ 27.06
    £ 27.06

    Add a unique touch to your bike. These Turn Signal Lens Kits replace the amber lenses for a clean front and rear appearance.

    • Bullet style with smoked lens
    • Meets DOT requirements
  • £ 249.40
    £ 249.40

    Keep an eye on everything, while everyone keeps an eye on you. These compact billet mirrors feature glass-smooth domed shells and wet-look black surfaces to reflect a new contemporary style.

    • Precision machined edge exposes three bands of satin aluminum for a brilliant contrast
    • Sleek round stems keep the mirrors close to the controls for a tight tucked-in profile
  • £ 157.20
    £ 157.20

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Rocker Box Covers, and Trasmission Side and Top Covers (sold seperately)
  • £ 152.16
    £ 152.16

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • £ 108.40
    £ 108.40

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • £ 43.33
    £ 43.33

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • £ 140.93
    £ 140.93

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.

    • Black anodized
    • Comfortable 1.5" diameter grips are easy to install
    • Incorporates a “glueless” design that allows you to remove the grips for service without damage
  • £ 65.02
    £ 65.02

    Complete the finned look from the base of the cylinder all the way to the rocker box.

    • Black finish
    • Aluminum covers fill the spark plug pockets and complete the horizontal fin look across the top of the left-hand side of the engine
    • Firmly held in place by spring clips
    • Slips into position and does not require removal of the spark plugs for installation
    • Easy to install
    • Sold in pairs
  • £ 28.15
    £ 28.15

    Available in your choice of chrome or gloss black finishes, these simple smooth domed timer covers add a classic finishing touch to your Milwaukee-Eight® engine motorcycle.

    • Gloss Black
    • Manufactured from Original Equipment components to ensure a perfect fit
  • £ 216.84
    £ 216.84

    The open-face filter design of the Screamin’ Eagle® Extreme-Flow Air Cleaner Kit provides 60% more filtered surface area to flow 11% more air than a traditional perimeter high-flow filter. When combined with the smooth radius die-cast back plate, this open filter can feed a large displacement engine with an unobstructed flow of clean air.

    • Round, Center Bolt - Extreme Open-Face Filter
    • Sized to fit behind Original Equipment or accessory center-bolt air cleaner covers
    • Includes the gloss-black finished die-cast back plate, an open-face washable oiled-cotton filter element, and all required installation gaskets and hardware
    • Optional Rain Sock P/N 29400362 is available to protect the exposed element in inclement weather
    • 50-State U.S. EPA compliant
  • £ 59.59
    £ 59.59

    Fat 10mm plug wires add dimension and style to your ride. Screamin’ Eagle® boot design and suppression core wires ensure solid connection and maximum voltage transfer between coil and plugs.

    • Black
    • Screamin’ Eagle® script printed along the wire to add style.
  • £ 108.40
    £ 108.40

    Forged from aluminum, this Billet Style Shift Lever is machined and polished for a beautiful, custom look.

    • Edge Cut finish
    • For Forward Controls
    • Includes chrome hardware
    • Shifter pegs sold separately
  • £ 173.47
    £ 173.47

    Styled to complement the Edge Cut components, these slotted hand levers feature a cut back finish that looks great against black or chrome hand controls. The crisp black anodized finish is machined to expose the raw aluminum highlights.

    • Edge Cut Finish
    • Clutch anti-rattle clip and new pivot bushings are included
  • £ 195.16
    £ 195.16

    Styled to complement our billet style mirror stems and hand and foot controls, this slotted Rear Brake Lever is forged from aluminum, then machined and polished for a beautiful, custom look.

    • Edge Cut finish
    • For Forward Controls
    • Brake pedal pads sold separately
  • £ 140.93
    £ 140.93

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride.

    • Black Anodized
    • Design incorporates a field of textured black rubber surrounded with deep longitudinal lines
    • Finished with a contemporary H-D logo
  • £ 130.09
    £ 130.09

    Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D logo.

    • Black Anodized Finish
    • Aluminum footpegs feature a pattern of deep lateral grooves
    • Includes a stylized H-D logo for a modern sleek look
1 - 20 of 27

Harley-Davidson® Parts

Narrow Your Search

Colour
Lens Colour