your bike
2018 Road King Special 2
Featuring low-profile solo touring seat, Screamin' Eagle® ventilator air cleaner and defiance black collection.
-
$ 128.05$ 128.05Harley-Davidson® Pushrod Cover Kit 17900081
Complete the sinister look. These covers replace existing chrome covers to give your bike a blacked-out appearance down to the smallest detail.
- Gloss black finish
- Can be installed on engines already equipped with Adjustable Pushrods or can be installed by removing rocker box covers, rocker arms, and non-adjustable pushrods
- Includes the four bottom cover tubes, four upper clips and four center collars
- Consult your dealer or service manual for installation
-
$ 102.43$ 102.43Harley-Davidson® Tappet Covers 25700890
Complete your Milwaukee-Eight engine's conversion to a total blacked-out look.
- Gloss Black finish
- Replaces the stock bright-finished components for a sinister appearance
- Manufactured from Original Equipment components for perfect fit and function
- Kit comes complete with a front and rear cylinder lifter covers and two base gaskets
-
$ 204.92$ 204.92Harley-Davidson® Defiance Derby Cover 25700572
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates deep longitudinal lines, and is finished with a contemporary H-D logo.
- Black Anodized Finish
- Designed side-by-side with Original Equipment components
- Exquisitely engineered cast and billet parts are machined to fit perfectly
- Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
-
$ 326.64$ 326.64Harley-Davidson® Defiance Cam Cover 25700710
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of engine covers feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates deep longitudinal lines, and is finished with a contemporary H-D® logo.
- Black Anodized Finish
- Designed side-by-side with Original Equipment components
- Exquisitely engineered cast and billet parts are machined to fit perfectly
- Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
-
$ 473.97$ 473.97Harley-Davidson® Defiance Upper Rocker Covers 25700712
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of engine components feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates deep longitudinal lines, and is finished with a contemporary H-D® logo.
- Black Anodized Finish
- Designed side-by-side with Original Equipment components
- Exquisitely engineered cast and billet parts are machined to fit perfectly
- Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
- Sold in pairs
-
$ 204.92$ 204.92Harley-Davidson® Defiance Transmission Side Cover 25800087
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of engine components feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates deep longitudinal lines, and is finished with a contemporary H-D® logo.
- Black Anodized Finish
- Designed side-by-side with the Original Equipment components
- Exquisitely engineered cast and billet parts are machined to fit perfectly
- Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
-
$ 96.03$ 96.03Harley-Davidson® Defiance Front Axle Nut Covers 43000064
Start a new tradition. Deep radial grooves and a contemporary H-D logo define the style Defiance Collection Front Axle Nut Covers. Available in your choice of chrome or black machine cut finish, these easy to install elements complement polished, chrome or blacked-out front end components.
- Black Machine Cut Finish
- Easy to install
- Sold in pairs
-
$ 371.47$ 371.47Harley-Davidson® Chopped Engine Guard 49000114A
Create a sleek, slammed look on your custom bagger with the Chopped Engine Guard. This guard offers a slim, low-profile design that retains function while delivering a unique styling twist.
- Gloss black
- Upper mounts connect midway up the downtube, 11" inches lower than the stock guard
- Minimalistic look reduces the visual mass of the bike, while the mounting point lowers the bike’s visual center of gravity
- 1.25” Engine Guard features a slightly forward sweep that provides plenty of room around the brake and shift levers
- Easy to install
-
$ 192.11$ 192.11Harley-Davidson® Oil Cooler Cover Kit - Gloss Black 25700634
Dress the Touring oil cooler in style. This Oil Cooler Cover is designed to hug the contours of the cooler body and does not interfere with the engine guard or voltage regulator. The forward-facing mesh screen adds a custom touch, and protects the oil cooler fins from road debris without disturbing the airflow across the surface.
- Gloss black finish
- Easy to install
- Includes required mounting hardware
-
$ 3,459.09$ 3,459.09Harley-Davidson® Screamin' Eagle Milwaukee-Eight Engine Stage IV Kit - 107 to 114CI 92500062
This Stage IV Kit was developed to deliver maximum horsepower from the Milwaukee-Eight® engine - all the way to the redline. The system-matched combination of larger displacement cylinders, free flowing CNC-Ported cylinder heads and a cam with the highest available valve lift are the starting point to building the perfect engine for the performance junkie. Designed for a high level of flexibility, this package is ideal for riders who like to comfortably cruise at lower rpm but still have plenty of arm-pulling acceleration when you whack the throttle. Kit includes CNC Ported Cylinder Heads with Performance Valve Springs, 64mm Throttle Body, High Flow Injectors (5.5g/s), 4.075" Bolt-On Cylinders, Forged 11:1 High Compression Aluminum Coated Pistons and Rings, SE8-515 Cam, Cam Bearing Upgrade, High Performance Tappets, Multi-layer Coated Head Gaskets, Top End, Cylinder Base and Cam Cover Gaskets, High Capacity Clutch Springs and Plates.
- Black highlighted
- Delivers up to 52% more power when compared to the Original Equipment engine configurations
- Provides thrilling acceleration when twisting the throttle
- Delivers increased response throughout the entire RPM range
- Maintains flat torque curve from cruising RPM to redline
- Can be installed without removing the engine from the chassis
- Retains Original Equipment Factory Warranty
- 50-State U.S. EPA compliant
-
$ 153.68$ 153.68Harley-Davidson® Milwaukee-Eight Gloss Black Lower Rocker Box Cover 25700521
This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.
- Gloss black
- Manufactured from Original Equipment components to ensure a perfect fit
- Coated with temperature-resistant paint to ensure a long-lasting finish
- Critical surfaces are masked to provide good gasket seal
- Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
-
$ 384.29$ 384.29Harley-Davidson® Screamin’ Eagle Ventilator Air Cleaner Kit – Milwaukee-Eight Engine 29400298
This low-profile oval air cleaner features an exposed filter element and a cast back plate designed to provide maximum air flow to the throttle body.
- Gloss black
- Easy to install
- Produces significant performance gains, while the stylish cover is tapered for added leg clearance
- Includes low-profile air cleaner cover, high-flow filter element, cast aluminum back plate, diamond-cut Screamin’ Eagle medallion, and all required installation hardware
- Protective Rain Sock P/N 29400177 or 29762-09 is available separately
- All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
- ECE 50-State U.S. EPA compliant
-
$ 102.43$ 102.43Harley-Davidson® Starter Motor End Cover - Gloss Black 31400090
It’s the details that make the complete custom bike.
- Gloss black
- Dresses the end of the starter motor for a clean look.
-
$ 51.19$ 51.19Harley-Davidson® Defiance Shifter Peg 33600111
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The complete Defiance Collection sets a new rebellious direction in customizing.
- Black anodized
- Wrapped in perforated rubber to protect your boot leather when shifting
- Adds a clean contemporary look to your ride
- Easy to install
-
$ 320.23$ 320.23Harley-Davidson® Turbine Polished Floating Brake Rotor 41500120
Complete the custom look with floating brake rotors, styled to complement Original Equipment or custom wheels. Floating rotors feature a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.
- Front
- Polished
- Sold individually
- Include chrome installation hardware
-
$ 512.40$ 512.40Harley-Davidson® Defiance Rider Footboard Kit 50500640
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.
- Black anodized
- Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
- Offers plenty of options for foot repositioning while riding
- Aluminum footboards feature an elegant perforated rubber pad recessed into the surface, surrounded by deep grooves and a contemporary H-D® logo
- Includes left and right boards
-
$ 83.23$ 83.23Harley-Davidson® Defiance Large Brake Pedal Pad 50600185
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.
- Black anodized
- Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
- Easy to install
-
$ 166.48$ 166.48Harley-Davidson® Defiance Hand Grips 56100157
Show your complete disregard for the rules. Defined by sweeping curves, this complete assortment of hand and foot controls feature a rich tuxedo black finish that is the perfect complement to your sinister ride. The design incorporates a field of textured black rubber surrounded with deep longitudinal lines, and is finished with a contemporary H-D® logo. The complete Defiance Collection sets a new rebellious direction in customizing.
- Black anodized
- Comfortable 1.5" diameter grips are easy to install
- Incorporates a “glueless” design that allows you to remove the grips for service without damage
-
$ 192.11$ 192.11Harley-Davidson® Oil Level and Temperature Dipstick with Lighted LCD Readout 62700194
New and improved “capacitive” level sensing technology provides the highest degree of accuracy and durability. This dipstick allows you to check your oil level and oil temperature with the push of a button. No more grabbing a rag to pull your hot dipstick. No more oil drips on your pipes and on the garage floor.
- Gloss black finish
- Add function and style by replacing your stock dipstick with this hard working version
- Simply push the button and this dipstick lights up with a brilliant backlight
- Oil level is indicated by a four-segment readout – it even reminds you to check your oil when it is hot
- Waterproof LCD (liquid crystal display) readout operates on long-lasting, replaceable lithium coin-type battery (P/N 91800066)
- Display features a low battery indicator and press-and-hold feature to toggle between Fahrenheit and Celsius
-
$ 192.11$ 192.11Harley-Davidson® Two-Piece 4.5 in. End Caps 65100076
Shaped to provide a complete finishing touch to the rear of your bike.
- Satin Black finish
- These slash cut end caps feature a reverse cone rolled edge for a massive solid billet look
- Reverse cone opening hugs the internal slotted flash suppressor-inspired barrel for a weapons-grade style
- Sold in pairs
Harley-Davidson® Parts
Narrow Your Search
