We uses cookies and other technologies so that we can improve your experience on our site. Read our Cookie Policy. Got It!
Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2018 Street Glide Special 2

Featuring wind splitter windshield, low-profile solo touring seat and the defiance collection.

1 - 20 of 40
  • $ 89.62
    $ 89.62

    Hide the AM/FM/WB antenna inside the fairing for a clean, uncluttered look. The perfect addition to Street Glide®, Road Glide® Custom and Electra Glide® Classic models equipped with H-D® Detachables™ Tour-Pak® luggage, this Hidden Antenna eliminates the need to move the whip antenna back and forth between Tour-Pak® Luggage and fender mounting locations.

    • Comparable to the performance of the Boom!™ Audio Shorty Antenna, this hidden amplified antenna is the perfect finish to your custom bagger
    • Kit includes all required mounting hardware and wiring
  • $ 224.15
    $ 224.15

    Anything but traditional, this complete collection of engine covers refuses to conform to everyday norms. The sweeping aero curves define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Designed side-by-side with Original Equipment components
    • Exquisitely engineered cast and billet parts are machined to fit perfectly
    • Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
  • $ 358.66
    $ 358.66

    Anything but traditional, this complete collection of engine covers refuses to conform to everyday norms. The sweeping aero curves define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Designed side-by-side with Original Equipment components
    • Exquisitely engineered cast and billet parts are machined to fit perfectly
    • Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
  • $ 224.15
    $ 224.15

    Anything but traditional, this complete collection of engine covers refuses to conform to everyday norms. The sweeping aero curves define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Designed side-by-side with the Original Equipment components
    • Exquisitely engineered cast and billet parts are machined to fit perfectly
    • Complete the look with gloss black primary, lower rocker boxes and transmission top covers (sold separately)
  • $ 96.03
    $ 96.03

    Start a new tradition. Deep radial grooves and a contemporary H-D logo define the style Defiance Collection Front Axle Nut Covers. Available in your choice of chrome or black machine cut finish, these easy to install elements complement polished, chrome or blacked-out front end components.

    • Black Machine Cut Finish
    • Easy to install
    • Sold in pairs
  • $ 371.47
    $ 371.47

    Create a sleek, slammed look on your custom bagger with the Chopped Engine Guard. This guard offers a slim, low-profile design that retains function while delivering a unique styling twist.

    • Gloss black
    • Upper mounts connect midway up the downtube, 11" inches lower than the stock guard
    • Minimalistic look reduces the visual mass of the bike, while the mounting point lowers the bike’s visual center of gravity
    • 1.25” Engine Guard features a slightly forward sweep that provides plenty of room around the brake and shift levers
    • Easy to install
  • $ 224.15
    $ 224.15

    Ringed with deep radial grooves, Defiance Collection Headlamp Trim Rings reflect your custom taste.

    • Black Machine Cut Finish
    • Surrounds the leading edge of the lamp for a solid billet look
    • Easy to install
    • Includes mounting hardware
  • $ 192.11
    $ 192.11

    The perfect finishing touch. Defiance Collection Gauge Bezels add a custom detail to the place you constantly look – your instrument cluster. Accented with deep grooves, these machined aluminum rings cover the factory gauge surround adding texture and visual interest to the dash.

    • Black Anodized Finish
    • Self-adhesive
    • Easy to install
  • $ 44.77
    $ 44.77

    Harness plugs into accessory connector to provide 12-volt power leads. Required to install Heated Grips, XM® Radio, Cruiser Amp & Speaker Systems, zumo GPS, Digital Oil Pressure Gauge, Garage Door Opener Kits, Heated Seats, decorative lighting or other electrical accessories.

    • Plugs into accessory connector
    • Ability to provide 12-volt power leads
  • $ 192.11
    $ 192.11

    Dress the Touring oil cooler in style. This Oil Cooler Cover is designed to hug the contours of the cooler body and does not interfere with the engine guard or voltage regulator. The forward-facing mesh screen adds a custom touch, and protects the oil cooler fins from road debris without disturbing the airflow across the surface.

    • Gloss black finish
    • Easy to install
    • Includes required mounting hardware
  • $ 76.80
    $ 76.80

    Complete the finned look from the base of the cylinder all the way to the rocker box.

    • Black finish
    • Aluminum covers fill the spark plug pockets and complete the horizontal fin look across the top of the left-hand side of the engine
    • Firmly held in place by spring clips
    • Slips into position and does not require removal of the spark plugs for installation
    • Easy to install
    • Sold in pairs
  • $ 3,459.09
    $ 3,459.09

    This Stage IV Kit was developed to deliver maximum horsepower from the Milwaukee-Eight® engine - all the way to the redline. The system-matched combination of larger displacement cylinders, free flowing CNC-Ported cylinder heads and a cam with the highest available valve lift are the starting point to building the perfect engine for the performance junkie. Designed for a high level of flexibility, this package is ideal for riders who like to comfortably cruise at lower rpm but still have plenty of arm-pulling acceleration when you whack the throttle. Kit includes CNC Ported Cylinder Heads with Performance Valve Springs, 64mm Throttle Body, High Flow Injectors (5.5g/s), 4.075" Bolt-On Cylinders, Forged 11:1 High Compression Aluminum Coated Pistons and Rings, SE8-515 Cam, Cam Bearing Upgrade, High Performance Tappets, Multi-layer Coated Head Gaskets, Top End, Cylinder Base and Cam Cover Gaskets, High Capacity Clutch Springs and Plates.

    • Black highlighted
    • Delivers up to 52% more power when compared to the Original Equipment engine configurations
    • Provides thrilling acceleration when twisting the throttle
    • Delivers increased response throughout the entire RPM range
    • Maintains flat torque curve from cruising RPM to redline
    • Can be installed without removing the engine from the chassis
    • Retains Original Equipment Factory Warranty
    • 50-State U.S. EPA compliant
  • $ 1,088.94
    $ 1,088.94

    Give your bike a big hug. This all-steel fender is shaped to show off the full profile of your 19” front wheel.

    • Hot Rod Red Flake finish
    • Apron-less fender wraps almost 180 degrees around the front tire for a clean, custom appearance
    • Low profile cutaway design exposes the wheel from hub to rim for maximum visual impact
    • Designed for mistake-proof installation
    • Pre-drilled to fit Original Equipment fender mounting bosses, and does not require additional fender spacers or install kits
    • Painted in a single color and does not feature pinstripes
  • $ 1,024.88
    $ 1,024.88

    Add a long, lean look to the profile of your Touring bike. These Stretched Side Covers are sculpted to smooth the visual transition from the side of the bike to the front of the saddlebag, and trade the traditional stepped look for a rearward flowing design.

    • Hard Candy Hot Rod Red Flake finish
    • Shaped to flare out and down the saddlebag face
    • Complements the body lines and eliminate the saddlebag guard clearance notch at the lower corner for a seamless flow
    • Unlike some aftermarket designs, these side covers fit without significantly compromising the available passenger foot space
    • One-piece covers are a snap-in replacement for the Original Equipment covers
    • Requires no bonding or modification for installation
    • Painted in a single color and does not feature pinstripes
  • $ 179.75
    $ 179.75

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • $ 153.68
    $ 153.68

    This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.

    • Gloss black
    • Manufactured from Original Equipment components to ensure a perfect fit
    • Coated with temperature-resistant paint to ensure a long-lasting finish
    • Critical surfaces are masked to provide good gasket seal
    • Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
  • $ 384.29
    $ 384.29

    This low-profile oval air cleaner features an exposed filter element and a cast back plate designed to provide maximum air flow to the throttle body.

    • Gloss black
    • Easy to install
    • Produces significant performance gains, while the stylish cover is tapered for added leg clearance
    • Includes low-profile air cleaner cover, high-flow filter element, cast aluminum back plate, diamond-cut Screamin’ Eagle medallion, and all required installation hardware
    • Protective Rain Sock P/N 29400177 or 29762-09 is available separately
    • All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation
    • ECE 50-State U.S. EPA compliant
  • $ 102.43
    $ 102.43

    It’s the details that make the complete custom bike.

    • Gloss black
    • Dresses the end of the starter motor for a clean look.
  • $ 51.19
    $ 51.19

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. The Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
  • $ 320.23
    $ 320.23

    Complete the custom look with floating brake rotors, styled to complement Original Equipment or custom wheels. Floating rotors feature a steel inner carrier that is shaped to accent the wheel, with a polished and drilled stainless steel outer disc that is precision-riveted in place.

    • Front
    • Polished
    • Sold individually
    • Include chrome installation hardware
1 - 20 of 40

Harley-Davidson® Parts

Narrow Your Search

Colour