We uses cookies and other technologies so that we can improve your experience on our site. Read our Cookie Policy. Got It!
Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

2018 Softail Slim

Featuring nostalgic detachable saddlebags and minimalistic passenger pillion.

1 - 20 of 25
  • $ 1,088.94
    $ 1,088.94

    These traditional throw-over style leather saddlebags are completely removable with the simple pull of the internal handle, leaving your bike clean and ready to cruise the boulevard. When removed, the bag leaves behind simple, inconspicuous docking points.

    • Brass Finish
    • Styled to complement the unique look of the stripped down Softail Slim® and Street Bob® models
    • Features a leather lid and a reinforced vinyl-wrapped body that complement stock and many accessory seats
    • Traditional leather straps and the brass buckles and hardware add a distinctive retro look
    • Can be installed with HoldFast™ sissy bars and racks when equipped with model-specific docking hardware
    • Includes all required mounting hardware
    • Luggage capacity
  • $ 243.37
    $ 243.37

    The Screamin’ Eagle® High-Flow Air Cleaner Kit provides increased airflow to boost the power of your Milwaukee-Eight® engine equipped model. The one-piece cast back plate is system-matched to the throttle body to deliver a smooth uninterrupted flow, and shaped to permit air to enter around the entire perimeter of the air cleaner housing. The back plate is topped with a washable perimeter-flow oiled-cotton filter element that captures debris while passing significantly more air than the stock filter.

    • Round - Center Bolt
    • Dress with available round Original Equipment or accessory center-bolt air cleaner covers (sold separately)
    • Choose to flaunt your performance gains with the open element look, and finish it off with custom Air Cleaner Trim from one of the Harley-Davidson decorative collections
    • Includes air cleaner element, gloss black back plate, breather and all required hardware
    • Optional Rain Sock P/N 29400363 is available to protect the exposed element in inclement weather
    • 50-State U.S. EPA compliant
  • $ 128.05
    $ 128.05

    Forged from aluminum, this Billet Style Shift Lever is machined and polished for a beautiful, custom look.

    • Satin Black finish
    • For Forward Controls
    • Includes chrome hardware
    • Shifter pegs sold separately
  • $ 179.29
    $ 179.29

    Grab some black with these levers – a natural fit for black accessory handlebars or to further the blacked-out look of your motorcycle

    • Black finish
    • Clutch anti-rattle clip and new pivot bushings are included
  • $ 230.54
    $ 230.54

    This Billet Style Rear Brake Lever is forged from billet aluminum, then machined and polished for a beautiful, custom look.

    • Satin Black finish
    • For footboards
    • Lever matches the length of the Original Equipment lever found on FL Softail motorcycles
    • Brake pedal pads sold separately
  • $ 25.56
    $ 25.56

    Required for installation of accessory Front Axle Covers on hollow-axle ’18-later Softail models.

    • For use on '18-later Softail models
    • Includes threaded axle spacer, left and right adapters and all hardware
  • $ 128.05
    $ 128.05

    Add footpegs to your solo seat-equipped '18-later Softail motorcycle.

    • Gloss Black Finish
    • Includes left and right footpeg supports and mounting hardware
    • Footpegs and footpeg hardware sold separately
  • $ 550.84
    $ 550.84

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Extended length sweeping shark-fin footboards are shaped to maintain a long and lean appearance
    • Aluminum footboards feature an elegant perforated rubber pad recessed into the surface
    • Offers plenty of options for foot repositioning while riding
    • Complemented with a contemporary H-D logo
    • Includes left and right boards
  • $ 179.29
    $ 179.29

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below
    • Includes a stylized H-D logo for a modern sleek look
  • $ 83.23
    $ 83.23

    Anything but traditional, this complete collection of hand and foot controls refuses to conform to everyday norms. The sweeping curves and perforated rubber define the look, and the rich contrasting finishes set the tone. The machine-cut Defiance Collection features deep grooves milled into the black anodized surface that exposes the shimmering aluminum below.

    • Black Anodized Machine Cut Finish
    • Features a rich black rubber panel set into the recessed surface, surrounded by deep accent grooves
  • $ 63.99
    $ 63.99

    The ideal choice for maximum versatility, this complete kit contains the docking hardware necessary to install all HoldFast detachable accessory options. Even if you only install a passenger backrest today, this kit allows you to add additional accessories as your touring demands change

    • Gloss Black Finish
    • Allows the addition of accessories as your touring demands change
    • Includes docking points to allow installation of H-D Detachables Sissy Bar, Solo Luggage Rack, Two-Up Luggage Rack, Solo Tour-Pak® Rack or Two-Up Tour-Pak Rack
  • $ 256.16
    $ 256.16

    A sissy bar and passenger backrest pad is the starting point for building a complete touring machine. The backrest adds long-range comfort and support and provides a feeling of confidence and control for the passenger.

    • Gloss Black
    • Features an exclusive latch system that permits the backrest to be installed or removed in seconds to add versatility to your ride
    • Upright simply slips into position on the docking points, and the fingertip latches are clicked into position for a positive lock
    • A wide variety of Backrest Pads are available to match your comfort or customizing requirements
    • Includes a matching 3-point backrest pad mount bracket
  • $ 83.23
    $ 83.23

    Sized to complement low-profile custom seats, this Compact Passenger Backrest Pad combines practical passenger support with custom compact style.

    • Black
    • Includes mounting bracket and hardware required for attachment to sissy bar upright
    • Pad height 3.75"; width 6.5"
  • $ 224.15
    $ 224.15

    Bring a passenger along for the ride. This easy-to-install detachable Passenger Pillion features a tuck and roll cover styled to match the Original Equipment solo seat.

    • Black
    • Style to match the Softail Slim
    • Includes mounting hardware and grab strap
  • $ 63.99
    $ 63.99

    Drift over to the dark side. Styled to match the Diamond Black right-side fuel cap, this left-side decorative tank cap is the perfect addition to a blacked-out ride. The rich satin black cap features a machined Bar & Shield logo and a custom knurled surrounding edge.

    • Diamond Black Finish
    • Left side decorative tank cap
    • Provides the rider with a symmetrical view over the tank
    • Replaces the Original Equipment trim
    • Easy-to-install
  • $ 63.99
    $ 63.99

    Drift over to the dark side with the Diamond Black Fuel Cap.

    • Complements the Diamond Black Collection Fuel Gauge
    • Perfect addition to a "blacked-out" custom ride
    • Features a ratcheting design to ensure that the design faces the correct direction
    • Easy to install
  • $ 108.84
    $ 108.84

    Dress the oil cooler in style. The cover fills the area between the frame downtubes for a complete custom look, without disturbing the airflow across the cooler’s surface. This Oil Cooler Cover replaces the plastic surround, and because it hugs the contours of the cooler body, it does not interfere with engine guard installation.

    • Gloss black finish
    • Easy-to-install
    • Includes all required mounting hardware
  • $ 128.05
    $ 128.05

    Required for saddlebag installation on certain Softail models, these elegant sweeping mounts move the turn signals and the side-mount license plate rearward on the fender struts, maintaining the stock lines.

    • Black Finish
  • $ 76.80
    $ 76.80

    Complete the finned look from the base of the cylinder all the way to the rocker box.

    • Black finish
    • Aluminum covers fill the spark plug pockets and complete the horizontal fin look across the top of the left-hand side of the engine
    • Firmly held in place by spring clips
    • Slips into position and does not require removal of the spark plugs for installation
    • Easy to install
    • Sold in pairs
  • $ 51.19
    $ 51.19

    Dare to be bold. Dressed in luxurious chrome, this complete hand and foot control assortment raises the customization bar. The Defiance Collection features rich textured black rubber traction surfaces set in a field of mirror chrome.

    • Chrome
    • Wrapped in perforated rubber to protect your boot leather when shifting
    • Adds a clean contemporary look to your ride
    • Easy to install
1 - 20 of 25

Harley-Davidson® Parts

Narrow Your Search

Colour