your bike
2018 Street Bob
Featuring tall and narrow chizeled handlebar and foot-down mid-controls.
$ 251.28$ 251.28Harley-Davidson® Screamin’ Eagle Extreme-Flow Air Cleaner 29400357
The open-face filter design of the Screamin’ Eagle® Extreme-Flow Air Cleaner Kit provides 60% more filtered surface area to flow 11% more air than a traditional perimeter high-flow filter. When combined with the smooth radius die-cast back plate, this open filter can feed a large displacement engine with an unobstructed flow of clean air.
- Round, Center Bolt - Extreme Open-Face Filter
- Sized to fit behind Original Equipment or accessory center-bolt air cleaner covers
- Includes the gloss-black finished die-cast back plate, an open-face washable oiled-cotton filter element, and all required installation gaskets and hardware
- Optional Rain Sock P/N 29400362 is available to protect the exposed element in inclement weather
- 50-State U.S. EPA compliant
$ 67.37$ 67.37Harley-Davidson® Screamin' Eagle 10MM Phat Spark Plug Wires 31600111
Fat 10mm plug wires add dimension and style to your ride. Screamin’ Eagle® boot design and suppression core wires ensure solid connection and maximum voltage transfer between coil and plugs.
- Black
- Screamin’ Eagle® script printed along the wire to add style.
$ 196.10$ 196.10Harley-Davidson® Edge Cut Control Lever Kit 36700211
Styled to complement the Edge Cut components, these slotted hand levers feature a cut back finish that looks great against black or chrome hand controls. The crisp black anodized finish is machined to expose the raw aluminum highlights.
- Edge Cut Finish
- Clutch anti-rattle clip and new pivot bushings are included
$ 24.46$ 24.46Harley-Davidson® Front Axle Cover Installation Kit 43000090
Required for installation of accessory Front Axle Covers on hollow-axle ’18-later Softail models.
- For use on '18-later Softail models
- Includes threaded axle spacer, left and right adapters and all hardware
$ 122.54$ 122.54Harley-Davidson® Passenger Footpeg Support Kit 50500769
Add footpegs to your solo seat-equipped '18-later Softail motorcycle.
- Gloss Black Finish
- Includes left and right footpeg supports and mounting hardware
- Footpegs and footpeg hardware sold separately
$ 122.54$ 122.54Harley-Davidson® Edge Cut Rider Footpegs 50500851
Live your life on the edge. The Edge Cut Collection features a crisp anodized finish that is machined to expose the highlights of raw aluminum. The contrasting cut back look makes a powerful visual statement and works great with both traditional and contemporary customizing styles.
- Edge Cut finish
- Slim footpeg design allows a comfortable pivot point
- Wide surface and narrow rubber bands hold your boots firmly in place
$ 122.54$ 122.54Harley-Davidson® Edge Cut Footpegs 50500857
Live your life on the edge. The Edge Cut Collection features a crisp anodized finish that is machined to expose the highlights of raw aluminum. The contrasting cut back look makes a powerful visual statement and works great with both traditional and contemporary customizing styles.
- Edge Cut finish
- Slim footpeg design allows a comfortable pivot point
- Wide surface and narrow rubber bands hold your boots firmly in place
- Includes left and right footpegs
$ 61.24$ 61.24Harley-Davidson® HoldFast Docking Hardware Kit 52300379
The ideal choice for maximum versatility, this complete kit contains the docking hardware necessary to install all HoldFast detachable accessory options. Even if you only install a passenger backrest today, this kit allows you to add additional accessories as your touring demands change
- Gloss Black Finish
- Allows the addition of accessories as your touring demands change
- Includes docking points to allow installation of H-D Detachables Sissy Bar, Solo Luggage Rack, Two-Up Luggage Rack, Solo Tour-Pak® Rack or Two-Up Tour-Pak Rack
$ 214.50$ 214.50Harley-Davidson® Passenger Pillion 52400128
Bring a passenger along for the ride. This easy-to-install detachable Passenger Pillion features a tuck and roll cover styled to match the Original Equipment solo seat.
- Black
- Styled to match the Street Bob®
- Includes mounting hardware and grab strap
$ 61.24$ 61.24Harley-Davidson® Diamond Black Fuel Cap 61100126
Drift over to the dark side with the Diamond Black Fuel Cap.
- Complements the Diamond Black Collection Fuel Gauge
- Perfect addition to a "blacked-out" custom ride
- Features a ratcheting design to ensure that the design faces the correct direction
- Easy to install
$ 202.24$ 202.24Harley-Davidson® Screamin' Eagle Round Air Cleaner Cover 61300845
The Ratchet Air Cleaner Cover trims the face of the Screamin’ Eagle® Round Air Cleaner filter in style. Ideal for use with Extreme open face filters, the forged aluminum cover wraps the leading edge of the filter element, covering the rubber gasket without restricting the airflow.
- Black Finish
- Features a center bar with Screamin’ Eagle script and a lugged outer ring
- Includes a black filler plate to cover the unfinished face of standard High Flow filter for a clean blacked-out appearance
$ 104.16$ 104.16Harley-Davidson® Oil Cooler Cover 62500027
Dress the oil cooler in style. The cover fills the area between the frame downtubes for a complete custom look, without disturbing the airflow across the cooler’s surface. This Oil Cooler Cover replaces the plastic surround, and because it hugs the contours of the cooler body, it does not interfere with engine guard installation.
- Gloss black finish
- Easy-to-install
- Includes all required mounting hardware
$ 159.31$ 159.31Harley-Davidson® Satin Black Muffler Shields - Long Shields 65400461
Complete the blacked out look. These rich satin-black shields wrap the chrome Street Cannon mufflers and complete the conversion to a sinister look. Styled to hug the lines of the mufflers, the blunt-cut shields are sized to expose the muffler end cap for a custom touch.
- Satin Black Finish
- Easy-to-install
- Includes front and rear shields and mounting clamps
$ 2,084.18$ 2,084.18Harley-Davidson® Screamin’ Eagle Milwaukee-Eight Engine Stage III Kit 92500070
This kit was developed for the rider looking for a solid seat of the pants increase you can feel – every time you roll on the throttle. The increase in displacement and the bump in compression deliver a significant increase in torque and power over stock while restoring the sensation of riding solo when taking that long trip with a passenger and luggage.
- Black Non-Highlighted
- The Stage III 107 to 114 upgrade delivers up to 39% more power and the 114 to 117 upgrade increases power by up to 24% when compared to the Original Equipment engine configurations
- Delivers increased throttle response throughout the entire RPM range
- Produces flexible roll-on passing power without a required downshift
- Delivers excellent stop-light to freeway speed on-ramp acceleration
- Retains Original Equipment Factory Warranty
- Includes Screamin' Eagle Cylinders, Pistons, Piston Rings, Cam, Valve Springs, Tappets, Head Gaskets, Cylinder Base and Cam Cover Gaskets, and Clutch Springs
- 50-State U.S. EPA compliant
$ 73.50$ 73.50Harley-Davidson® Finned Spark Plug Covers - Black 25800061
Complete the finned look from the base of the cylinder all the way to the rocker box.
- Black finish
- Aluminum covers fill the spark plug pockets and complete the horizontal fin look across the top of the left-hand side of the engine
- Firmly held in place by spring clips
- Slips into position and does not require removal of the spark plugs for installation
- Easy to install
- Sold in pairs
$ 177.71$ 177.71Harley-Davidson® Milwaukee-Eight Gloss Black Cam Cover 25700467
This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.
- Gloss black
- Manufactured from Original Equipment components to ensure a perfect fit
- Coated with temperature-resistant paint to ensure a long-lasting finish
- Critical surfaces are masked to provide good gasket seal
- Complete the look with a matching Primary Cover, Rocker Box Covers, and Trasmission Side and Top Covers (sold seperately)
$ 172.01$ 172.01Harley-Davidson® Milwaukee-Eight Gloss Black Upper Rocker Box Cover 25700520
This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.
- Gloss black
- Manufactured from Original Equipment components to ensure a perfect fit
- Coated with temperature-resistant paint to ensure a long-lasting finish
- Critical surfaces are masked to provide good gasket seal
- Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
$ 147.07$ 147.07Harley-Davidson® Milwaukee-Eight Gloss Black Lower Rocker Box Cover 25700521
This engine cover is the perfect start in converting your powertrain to an elegant “tuxedo black” look.
- Gloss black
- Manufactured from Original Equipment components to ensure a perfect fit
- Coated with temperature-resistant paint to ensure a long-lasting finish
- Critical surfaces are masked to provide good gasket seal
- Complete the look with a matching Primary Cover, Cam Cover, and Trasmission Side and Top Covers (sold seperately)
$ 122.54$ 122.54Harley-Davidson® Airflow Hand Grips 56100218
Defined by a sleek surround, the deep hockey-stick groove and the smooth rubber traction strips, this delta wing-inspired collection is the perfect match for your high-profile street machine. The rich black high-grip surfaces are divided by a deep channel that draws your eye from the leading to the trailing edge.
- Gloss black
- Combines a traction-grip crosshatch rubber surface with a comfortable 1.6" diamter
- Excellent control in wet or dry weather
- Easy to install
- "Glueless" design allows you to remove the grips for service without damage
$ 110.28$ 110.28Harley-Davidson® LED Bullet Turn Signal Insert Kit 67800639
Grab the attention of the traffic around you. LED Turn Signal Inserts feature a single bright, fast-acting amber LED lamp sealed in a waterproof housing. The multi-faceted reflector amplifies the light, and the focused lens spreads the light across the lamp’s surface.
- Amber LED Insert
- Drop-in lamp assembly replaces the bulb and reflector in the stock bullet turn signal housing for a simple on-bike installation
- Included plug-in harness and crimp connectors attach directly to the existing turn signal wiring
- Installation does not require a control box or load equalizer for correct operation
- Kit includes 2 LED modules, 2 wiring harnesses, and crimping connectors
- Customize the look with your choice of outer lens cover colour
- Lenses sold separately
- Amber Inserts are DOT and ECE compliant
Harley-Davidson® Parts
Narrow Your Search
