We uses cookies and other technologies so that we can improve your experience on our site. Read our Cookie Policy. Got It!
Shop for
your bike
Find accessories & parts designed for your motorcycle by selecting the year and model of your bike.

H-D® SE Specialty Tools

There's a right tool for every job, and H-D® Screamin' Eagle® specialty motorcycle tools will help you get the job done right.

1 - 20 of 27
  • £ 32.48
    £ 32.48

    Plug-in extension cable is wired to allow installation of the Screamin’ Eagle® Smart Tune PRO Automatic Tuning Module hardware on specific models.

    • No splicing or soldering is required
  • £ 43.33
    £ 43.33

    Threaded adaptors allow you to convert your M18 wideband O2 sensor equipped motorcycle back to the Original Equipment M12 O2 sensors.

    • Allows you to re-use your factory M12 threaded oxygen ensors after tuning the larger M18 threads found on the wideband oxygen sensors
    • Set of 2
  • £ 433.75
    £ 433.75

    Smart Tune Pro works with the Screamin' Eagle® Pro Street Tuner to automatically tune your bike for the combination of performance components, temperatures, altitude, and vehicle load conditions you are operating in. You just install the upgraded wideband oxygen sensors in the exhaust headers, download the calibration that our Screamin' Eagle® engineers have developed as a starting point, then simply drive down the road and let Smart Tune Pro do the work for you.

    • Constantly monitors the operating parameters of your motorcycle, and automatically adjusts the bike's Electronic Control Module (ECM) to maximize performance in most riding conditions
    • Utilizes wideband O2 sensors that read oxygen levels in the exhaust stream to determine the optimum air/fuel ratio, spark advance and timing your bike needs at this very moment
    • Incorporates the data and automatically makes real-time tuning adjustments to the ECM
    • Wideband sensors can read and help adjust tuning throughout the part throttle cruising and full-throttle acceleration operating range
    • Kit includes the Smart Tune Pro module with plug-in wiring harness, two M18 wideband O2 sensors, and access to free software updates, future calibrations and free on-line training modules
    • Screamin' Eagle® Pro Street Tuner and model-specific installation hardware is sold separately
    • Pending Regulatory Approval
  • £ 162.62
    £ 162.62

    Designed to match the increased air velocity and fuel delivery demands of the Milwaukee-Eight® engine equipped with big bore cylinders, ported heads and larger throttle body.

    • Standard equipment in Milwaukee-Eight® Stage IV Kits
    • Provide fuel delivery at the rate of 5.5 grams/second, 24% more than the Original Equipment injectors
  • £ 433.75
    £ 433.75

    This special tool is designed to make the necessary headpipe modifications for installation of the Screamin’ Eagle® Smart Tune PRO Automatic Tuning Module’s wide band oxygen sensors.

    • Simply remove headpipe and use custom ground drill and tap to convert the oxygen sensor threads from M12 to M18
    • No welding is required
    • Threaded adapaters to allow the re-installation of the factory M12 oxygen sensors are sold separately
  • £ 650.66
    £ 650.66

    A great addition to a high-performance motor, or for the rider that tours in extreme temperature conditions, the Screamin' Eagle® cast-aluminum oil pan is designed to increase the oil capacity by 1.5 quarts over the Original Equipment pan. Increased capacity means the oil cycles through the engine less frequently and the oil can remain in the pan for a longer period of time.

    • Cast-in internal baffles manage the flow to the oil pickup, and keep the hot oil exposed to the heat-conducting ribbed aluminum sump
    • Kit includes cast aluminum oil pan and pan gasket
  • £ 162.62
    £ 162.62

    The Screamin' Eagle® Manual Primary Chain Tension Adjuster is a real benefit in those aggressive racing situations where frequent drag racing starts and high rpm speed shifting are part of the riding experience.

    • Ideal for bikes equipped with big displacement high performance (100hp+) engines that are regularly used for track-day drag racing
    • Permits manual selection of primary chain tension
    • A direct replacement for the Original Equipment automatic version
    • Anodized billet aluminum adjuster allows you to fine-tune the settings and lock the position when the freeplay is properly set
    • The manual adjustment locks the chain tension in place to prevent the chain from adjusting during severe shifting
    • Kit includes required mounting hardware
  • £ 44.41
    £ 44.41

    This tool allow you to use the same precise assembly techniques used at the factory. Many fasteners on the engine should be tightened to an initial torque value and then turned an additional prescribed angle to ensure that the fastener has the appropriate amount of "stretch" and attains the required clamp load.

    • Easy-to-read dial face provides precise measurement, and the 3/8" drive makes this tool compact and easy to use in most applications
  • £ 168.05
    £ 168.05

    This extended-length socket is designed to fit over the long transmission shaft simplifying the removal and installation of the large transmission pulley locknuts.

    • Manufactured from hardened tool steel, the socket includes a stabilizer spacer that keeps the threaded shaft end from hitting the socket during removal and installation
  • £ 168.05
    £ 168.05

    This extended-length socket is designed to fit over the long transmission shaft simplifying the removal and installation of the large transmission pulley locknuts.

    • Manufactured from hardened tool steel, the socket includes a stabilizer spacer that keeps the threaded shaft end from hitting the socket during removal and installation
  • £ 201.66
    £ 201.66

    This precision tool is designed to ease the installation of the inner cam bearings into the bore.

    • Manufactured from hardened tool steel, this precision tool perfectly positions the bearings and prevents the pin bearings from falling into the engine case
  • £ 52.00
    £ 52.00

    This high-quality ratcheting tool allows technician to manually rotate the flywheel of the engine to check cam timing, and to inspect valve-to-valve, piston-to-valve and piston-to-piston clearances.

    • Designed to easily slip over the output crankshaft spline, the wrench features a simple-to-use finger-operated lever to reverse the ratcheting direction
  • £ 46.58
    £ 46.58

    This high-quality ratcheting tool allows technician to manually rotate the flywheel of the engine to check cam timing, and to inspect valve-to-valve, piston-to-valve and piston-to-piston clearances.

    • Designed to easily slip over the output crankshaft spline, the wrench features a simple-to-use finger-operated lever to reverse the ratcheting direction
    • Certified by Harley-Davidson® to perform to our tough vehicle standards for quality and durability
  • £ 44.41
    £ 44.41

    This handy tool simplifies the removal and installation of the retaining clip on Harley-Davidson® collapsible push rod tubes.

    • Convenient design reduces the risk of scratched engine parts and hands, and the quality composite handles provide a sure and solid grip
  • £ 146.36
    £ 146.36

    This precision tool simplifies the removal of the inner cam bearing, and reduces the risk of damaging the crankcase.

    • Also designed to keep the pin rollers from accidentally falling into the crankcase
  • £ 43.33
    £ 43.33

    Tool allows a technician to effectively lock the camshaft and crankshaft sprockets to properly remove, replace, and torque the sprocket bolts.

    • Made from non-marring Delrin® material to protect the crank and cam sprocket teeth and surface finishes
    • For use with Silent Chains
  • £ 43.33
    £ 43.33

    Tool allows a technician to effectively lock the camshaft and crankshaft sprockets to properly remove, replace, and torque the sprocket bolts.

    • Made from non-marring Delrin® material to protect the crank and cam sprocket teeth and surface finishes
    • For use with Roller Chains
  • £ 38.99
    £ 38.99

    This high-quality wrench simplifies working on the rocker box while the engine is mounted in the motorcycle's frame. This tool features a low profile design to allow access to the tight spaces between the frame and the engine.

    • Has a long handle for increased reach, a replaceable bit and a reversible ratcheting action so the socket head cap screw can be ratcheted in or out
    • Comfortable soft vinyl grip with Screamin' Eagle® graphic protects the engine from scratches
  • £ 65.02
    £ 65.02

    This high-quality ratcheting tool allows technician to manually rotate the flywheel of the engine to check cam timing, and to inspect valve-to-valve, piston-to-valve and piston-to-piston clearances.

    • Designed to easily slip over the output crankshaft spline, the wrench features a simple-to-use finger-operated lever to reverse the ratcheting direction
  • £ 27.06
    £ 27.06

    This cut-away socket is designed to clear the wire lead and simplify the removal or installation of the oxygen sensor on closed loop fuel injected models.

    • Manufactured to withstand the installation torque requirements, the socket features a 3/8" drive receiver
1 - 20 of 27

Harley-Davidson® Parts

Narrow Your Search